WORKERS_Lot409

These waist-high overalls are made from 100% cotton, 6-ounce black Wabash stripe fabric with reactive dyeing.

This type of design usually has a large gap in the back, but we have deliberately considered ease of use and designed it to look more like ordinary work pants.

*The above size chart is the manufacturer's published value after washing. The measurement may vary by 1-2 cm due to measurement method, shrinkage rate error due to the lot of the fabric itself, and sewing error. If you are unsure, choose a larger size. You can tighten it with the back cinch. Also, the thigh width is measured at about 10 cm below the crotch. The rise is measured up to the waist belt. The listed size is the waist measurement in an unwashed state. Please do not be bound by the listed size, but measure the waist circumference of jeans or work pants you own that have a similar rise and choose a size close to the one you want.

*This product uses deadstock needle buckles. Therefore, the tip is sharp and may damage surrounding objects. Please be aware of this before ordering. *Most Workers products are sewn using cotton thread. Since we aim for thread thickness and pitch to be as close as possible to vintage, some products are prone to thread breakage. Some parts are layered. We hope you understand that this is unavoidable when reproducing old items. Also, if the thread wears out or some stitches come off while wearing, please layer the parts. You can also sew by hand. Just that will make a big difference in durability.